Case 4: Enabling the Core in Video/Command Mode - 2.3 English

Command Mode

• If core_en = 0: Enable bits 3 and 0 in Core Configuration Register (0x0)
• If core_en = 1 and command_mode = 0
  • Disable the core, make core enable 0
  • Enable command mode
  • Enable Core

Video Mode

• If core_en = 0:
  • Program required Timing Registers
  • Make core_en = 1 and command mode bit = 0
• If core_en = 1 and command_mode = 1
  • Wait for command execution in progress (bit 11 of 0x2C) to be 0
  • Ensure timing registers are programmed
  • Make command mode = 0