RAM32X2S - 2024.1 English

Primitive: 32-Deep by 2-Wide Static Synchronous RAM

Introduction

This design element is a 32-bit deep by 2-bit wide static random access memory with synchronous write capability. When the write enable (WE) is Low, transitions on the write clock (WCLK) are ignored and data stored in the RAM is not affected. When (WE) is High, any positive transition on (WCLK) loads the data on the data input (D1-D0) into the word selected by the 5-bit address (A4-A0). For predictable performance, address and data inputs must be stable before a Low-to-High (WCLK) transition. This RAM block assumes an active-High (WCLK). However, (WCLK) can be active-High or active-Low. Any inverter placed on the (WCLK) input net is absorbed into the block. The signal output on the data output pins (O1-O0) is the data that is stored in the RAM at the location defined by the values on the address pins.

You can use the INIT_00 and INIT_01 properties to specify the initial contents of RAM32X2S.

Logic Table

Inputs			Outputs
WE (Mode)	WCLK	D	O0-O1
0 (read)	X	X	Data
1 (read)	0	X	Data
1 (read)	1	X	Data
1 (write)	↑	D1:D0	D1:D0
1 (read)	↓	X	Data
Data = word addressed by bits A4:A0

Design Entry Method

Instantiation	Yes
Inference	Recommended
IP Catalog	No
Macro support	No

Available Attributes

Attribute	Type	Allowed Values	Default	Descriptions
INIT_00	HEX	Any 32-bit value	All zeros	INIT for bit 0 of RAM.
INIT_01	HEX	Any 32-bit value	All zeros	INIT for bit 1 of RAM.

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.

Library UNISIM;
use UNISIM.vcomponents.all;


-- RAM32X2S: 32 x 2 posedge write distributed (LUT) RAM (Mapped to SliceM LUT6)
--           7 Series
-- Xilinx HDL Language Template, version 2024.1

RAM32X2S_inst : RAM32X2S
generic map (
   INIT_00 => X"00000000", --  INIT for bit 0 of RAM
   INIT_01 => X"00000000") --  INIT for bit 1 of RAM
port map (
   O0 => O0,     -- RAM data[0] output
   O1 => O1,     -- RAM data[1] output
   A0 => A0,     -- RAM address[0] input
   A1 => A1,     -- RAM address[1] input
   A2 => A2,     -- RAM address[2] input
   A3 => A3,     -- RAM address[3] input
   A4 => A4,     -- RAM address[4] input
   D0 => D0,     -- RAM data[0] input
   D1 => D1,     -- RAM data[1] input
   WCLK => WCLK, -- Write clock input
   WE => WE      -- Write enable input
);

-- End of RAM32X2S_inst instantiation

Verilog Instantiation Template


// RAM32X2S: 32 x 2 posedge write distributed (LUT) RAM (Mapped to a SliceM LUT6)
//           7 Series
// Xilinx HDL Language Template, version 2024.1

RAM32X2S #(
   .INIT_00(32'h00000000), // INIT for bit 0 of RAM
   .INIT_01(32'h00000000)  // INIT for bit 1 of RAM
) RAM32X2S_inst (
   .O0(O0),     // RAM data[0] output
   .O1(O1),     // RAM data[1] output
   .A0(A0),     // RAM address[0] input
   .A1(A1),     // RAM address[1] input
   .A2(A2),     // RAM address[2] input
   .A3(A3),     // RAM address[3] input
   .A4(A4),     // RAM address[4] input
   .D0(D0),     // RAM data[0] input
   .D1(D1),     // RAM data[1] input
   .WCLK(WCLK), // Write clock input
   .WE(WE)      // Write enable input
);

// End of RAM32X2S_inst instantiation

Related Information

7 Series FPGAs Configurable Logic Block User Guide (UG474)