FDSE - 2024.1 English

Primitive: D Flip-Flop with Clock Enable and Synchronous Set

Introduction

FDSE is a single D-type flip-flop with data (D), clock enable (CE), and synchronous set (S) inputs and data output (Q). The synchronous set (S) input, when High, overrides the clock enable (CE) input and sets the Q output High during the Low-to-High clock (C) transition. The data on the D input is loaded into the flip-flop when S is Low and CE is High during the Low-to-High clock (C) transition.

This flip-flop is asynchronously preset, outputs High, when power is applied. Power-on conditions are simulated when global set/reset (GSR) is active. GSR defaults to active-High but can be inverted by adding an inverter in front of the GSR input of the STARTUP_E2 symbol.

Logic Table

Inputs				Outputs
S	CE	D	C	Q
1	X	X	↑	1
0	0	X	X	No Change
0	1	D	↑	D

Design Entry Method

Instantiation	Yes
Inference	Recommended
IP Catalog	No
Macro support	No

Available Attributes

Attribute	Type	Allowed Values	Default	Description
INIT	BINARY	0, 1	1	Sets the initial value of Q output after configuration.

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.

Library UNISIM;
use UNISIM.vcomponents.all;


-- FDSE: Single Data Rate D Flip-Flop with Synchronous Set and
--       Clock Enable (posedge clk).
--       7 Series
-- Xilinx HDL Language Template, version 2024.1

FDSE_inst : FDSE
generic map (
   INIT => '0') -- Initial value of register ('0' or '1')
port map (
   Q => Q,      -- Data output
   C => C,      -- Clock input
   CE => CE,    -- Clock enable input
   S => S,      -- Synchronous Set input
   D => D       -- Data input
);

-- End of FDSE_inst instantiation

Verilog Instantiation Template


// FDSE: Single Data Rate D Flip-Flop with Synchronous Set and
//       Clock Enable (posedge clk).
//       7 Series
// Xilinx HDL Language Template, version 2024.1

FDSE #(
   .INIT(1'b0) // Initial value of register (1'b0 or 1'b1)
) FDSE_inst (
   .Q(Q),      // 1-bit Data output
   .C(C),      // 1-bit Clock input
   .CE(CE),    // 1-bit Clock enable input
   .S(S),      // 1-bit Synchronous set input
   .D(D)       // 1-bit Data input
);

// End of FDSE_inst instantiation

Related Information

7 Series FPGAs Configurable Logic Block User Guide (UG474)