refresh_hw_vio - 2020.2 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2020-11-18
Version
2020.2 English

Update hardware probe INPUT_VALUE and ACTIVITY_VALUE properties with values read from hardware VIO core(s).

Syntax

refresh_hw_vio [‑update_output_values] [‑quiet] [‑verbose] <hw_vios>...

Usage

Name Description
[-update_output_values] Update hardware probe OUTPUT_VALUE property with values read from VIO core(s).
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution
<hw_vios> List of hardware VIO objects.

Categories

Hardware

Description

Update the INPUT_VALUE and ACTIVITY_VALUE properties of the input probes of the specified VIO debug cores with values read from the hw_vio core on the hardware device.

The Virtual Input/Output (VIO) debug core can both monitor and drive internal signals on a programmed Xilinx device in real time. The VIO core uses hardware probes, hw_probe objects, to monitor and drive signals on the device. Input probes monitor signals as inputs to the VIO core. Output probes drive signals to specified values from the VIO core.

The refresh_hw_vio command reads the signal values at the input probes of the VIO debug core on the device, and applies the value to the INPUT_VALUE property of the hw_probe, and updates the ACTIVITY_VALUE property on the probe as well.

This command returns nothing if successful, or returns an error if it fails.

Arguments

-update_output_values - (Optional) Update hardware probe OUTPUT_VALUE property with values read from the signals at the specified VIO debug cores. This is a boolean argument enabled by its presence. This option has the affect of resetting the OUTPUT_VALUE on the probe to match the signal value on the hw_vio debug core.
Tip: This is the reverse of the commit_hw_vio command, which applies the OUTPUT_VALUE on the probe to the hw_vio debug core on the device.
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

<hw_vios> - (Required) Specify one or more hw_vio objects to refresh. The hw_vio objects can either be specified as objects returned by the get_hw_vios command, or specified by name.

Example

The following example refreshes the specified hw_vio debug core, specified by name, including updating the OUTPUT_VALUE property on the hw_probes:
refresh_hw_vio -update_output_values hw_vio_1