Compute achievable incremental reuse for the given design-checkpoint and report
Syntax
report_incremental_reuse [‑file <arg>] [‑append] [‑cells <args>]
[‑hierarchical] [‑hierarchical_depth <arg>] [‑return_string] [‑quiet]
[‑verbose]
Usage
Name | Description |
---|---|
[-file]
|
Filename to output results to. (send output to console if -file is not used) |
[-append]
|
Append to existing file |
[-cells]
|
Report incremental reuse of given list of cells |
[-hierarchical]
|
Generates text-based hierarchical incremental reuse report. |
[-hierarchical_depth]
|
Specifies the depth level for textual hierachical incremental reuse report Default: 0 |
[-return_string]
|
Return report as string |
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
Categories
Description
For use with the incremental implementation flow, this command reports on the amount of design overlap between the current design and an incremental checkpoint loaded using the read_checkpoint -incremental
command.
This report analyzes the loaded incremental checkpoint against the current design to see if the two are sufficiently correlated to drive incremental placement and routing. A low correlation between the current design and the checkpoint should discourage using the checkpoint as a basis for incremental place and route. Refer to the Vivado Design Suite User Guide: Implementation (UG904) for more information on incremental place and route.
If there is a low correlation of reuse between the current design and the loaded incremental checkpoint, you will need to restore the original design using open_run
or read_checkpoint
. Alternatively, you can overload the incremental checkpoint in the current design by issuing the read_checkpoint -incremental
command again to specify a new incremental checkpoint.
For Partial Reconfiguration (PR) designs, the % of cells matching in Reconfigurable Modules (RM) are reported, the % of cells reused in RMs, and the % of cells fixed in RMs are also reported. There is also a Reconfigurable Modules Summary table added to the report.
Arguments
-file
<arg> - (Optional) Write the report into the specified file. The specified file will be overwritten if one already exists, unless -append
is also specified. By default, the report will be written to the Tcl console.
-append
- (Optional) Append the output of the command to the specified file rather than overwriting it.
-append
option can only be used with the -file
option.
-cells
<args> - (Optional) Specifies the cells to use from the DCP file.
-hierarchical
- (Optional) Generate a text-based hierarchical incremental reuse report.
-hierarchical_depth
<arg> - (Optional) Specifies the depth level for the text-based hierarchical incremental reuse report. The default is 0.
-return_string
- (Optional) Directs the output to a Tcl string rather than to the standard output. The Tcl string can be captured by a variable definition and parsed or otherwise processed.
-file
option.-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
set_msg_config
command.Examples
read_checkpoint -incremental C:/Data/reuse_checkpoint1.dcp
report_incremental_reuse