Enable/disable WebTalk to send software, IP and device usage statistics to Xilinx. Note: WebTalk is always enabled for WebPACK users. WebTalk ignores user and install preference when a bitstream is generated using the WebPACK license. If a design is using a device contained in WebPACK and a WebPACK license is available, the WebPACK license will be used. To change this, please see answer record 34746.
Syntax
config_webtalk [‑info] [‑user <arg>] [‑install <arg>] [‑quiet] [‑verbose]
Usage
Name | Description |
---|---|
[-info]
|
Show whether WebTalk is currently enabled or disabled |
[-user]
|
Enable/disable WebTalk for the current user. Specify either 'on' to enable or 'off' to disable. Default: empty |
[-install]
|
Enable/disable WebTalk for all users of the current installation. Specify either 'on' to enable or 'off' to disable. If you specify 'off', individual users will not be able to enable WebTalk using the -user option. You may need administrator rights to use this option. Default: empty |
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
Categories
Description
WebTalk is a secure design data collection feature of Xilinx software that helps Xilinx understand how you are using Xilinx devices, software, and Intellectual Property (IP).
This command returns the current state of the WebTalk feature for the current user and software installation. You can also enable or disable WebTalk to send software, IP and device usage statistics to Xilinx. No data is sent if you disable WebTalk, except for the use of the WebPACK license to generate a bitstream.
Participation in WebTalk is voluntary, except for the use of the WebPACK license. WebTalk data transmission is mandatory, and is always enabled for WebPACK users. WebTalk ignores user and install preference when a bitstream is generated using the WebPACK license.
Arguments
-info
- (Optional) Returns information about the current Webtalk configuration. The state of WebTalk is dependent on both the user and install setting. If either of these settings is disabled, then WebTalk is disabled.
-user
<arg> - (Optional) Enables or disables WebTalk for the current user.
-install
- (Optional) Enables or disables WebTalk for the current software installation.
-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
set_msg_config
command.Examples
config_webtalk -info
INFO: [Coretcl-120] Webtalk has been disabled by the current user.
INFO: [Coretcl-123] Webtalk has been enabled for the current installation.
INFO: [Coretcl-110] This combination of user/install settings means that
WebTalk is currently disabled.
config_webtalk -user on