Get a list of bel_pins. If a design is loaded, gets the constructed site type bels.
Syntax
get_bel_pins [‑regexp] [‑nocase] [‑filter <arg>] [‑of_objects <args>]
[‑quiet] [‑verbose] [<patterns>]Returns
bel_pin
Usage
| Name | Description |
|---|---|
[-regexp]
|
Patterns are full regular expressions |
[-nocase]
|
Perform case-insensitive matching. (valid only when -regexp specified) |
[-filter]
|
Filter list with expression |
[-of_objects]
|
Get the bel_pin of these bels, sites, pins, or nets. |
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
[<patterns>]
|
Match bel_pin against patterns Default: * |
Description
Returns a list of pins on the specified BELs, or matching a specified search pattern.
The default command gets a list of all pins on all BELs on the device.
Note: To improve memory and performance, the
get_* commands return a container list of a single type of objects (e.g. cells, nets, pins, or ports). You can add new objects to the list (using lappend for instance), but you can only add the same type of object that is currently in the list. Adding a different type of object, or string, to the list is not permitted and will result in a Tcl error.
Arguments
-regexp - (Optional) Specifies that the search <patterns> are written as regular expressions. Both search <patterns> and -filter expressions must be written as regular expressions when this argument is used. Xilinx regular expression Tcl commands are always anchored to the start of the search string. You can add ".*" to the beginning or end of a search string to widen the search to include a substring. See http://perldoc.perl.org/perlre.html for help with regular expression syntax.
Note: The Tcl built-in command
regexp is not anchored, and works as a standard Tcl command. For more information refer to http://www.tcl.tk/man/tcl8.5/TclCmd/regexp.htm.
-nocase - (Optional) Perform case-insensitive matching when a pattern has been specified. This argument applies to the use of -regexp only.
-filter <args> - (Optional) Filter the results list with the specified expression. The -filter argument filters the list of objects returned by get_bel_pins based on property values on the bel_pins. You can find the properties on an object with the report_property or list_property commands. Any property/value pair can be used as a filter. In the case of the bel_pin object, "NAME" and "IS_INVERTED" are two of the properties that can be used to filter results.
The filter search pattern should be quoted to avoid having to escape special characters that may be found in net, pin, or cell names, or other properties. String matching is case-sensitive and is always anchored to the start and to the end of the search string. The wildcard “*” character can be used at the beginning or at the end of a search string to widen the search to include a substring of the property value.
Note: The filter returns an object if a specified property exists on the object, and the specified pattern matches the property value on the object. In the case of the "*" wildcard character, this will match a property with a defined value of "".
For string comparison, the specific operators that can be used in filter expressions are "equal" (==), "not-equal" (!=), "match" (=~), and "not-match" (!~). Numeric comparison operators <, >, <=, and >= can also be used. Multiple filter expressions can be joined by AND and OR (&& and ||). The following gets input pins that do NOT contain the “RESET” substring within their name:
get_pins * -filter {DIRECTION == IN && NAME !~ "*RESET*"}
Boolean (
bool) type properties can be directly evaluated in filter expressions as true or not true: -filter {IS_PRIMITIVE && !IS_LOC_FIXED}
-of_objects <args> - (Optional) This option can be used with the get_bels command to return the pins of specified BELs.
Note: The
-of_objects option requires objects to be specified using the get_* commands, such as get_cells or get_pins, rather than specifying objects by name. In addition, -of_objects cannot be used with a search <pattern>.
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the
set_msg_config command.<patterns> - (Optional) Match bel_pin objects against the specified patterns. The default pattern is the wildcard '*' which gets a list of all bel_pins on the device. More than one search pattern can be specified to find pins based on different search criteria.
Note: You must enclose multiple search patterns in braces, {}, or quotes, "", to present the list as a single element.
Examples
The following example returns the pins of the specified BELs associated with the specified range of sites on the device:
get_bel_pins -of_objects [get_bels -of_objects [get_sites \
-range {SLICE_X0Y0 SLICE_X1Y1}] ]The following example returns the clock enable (CE) pins of all BELs on the device:
get_bel_pins *CE