Close a design.
Syntax
close_bd_design [‑quiet] [‑verbose] <name>
Returns
The design object, "" if failed.
Usage
Name | Description |
---|---|
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
<name>
|
Name of design to close |
Categories
Description
Closes the specified IP subsystem design in the IP integrator of the Vivado Design Suite.
If the design has been modified, you will not be prompted to save the design prior to closing. You will need to run save_bd_design
to save any changes made to the design before using the close_bd_design
command.
Arguments
-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the
set_msg_config
command.<name> - The name of the IP subsystem design object to close.
Example
The following example closes the current IP subsystem design in the current project:
close_bd_design [current_bd_design]