report_conditions - 2020.2 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2020-11-18
Version
2020.2 English

Print details of the given condition objects

Syntax

report_conditions [‑quiet] [‑verbose] [<ConditionObjs>...]

Returns

Prints name, id, condition_expression and commands of each condition object on the console

Usage

Name Description
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution
[<ConditionObjs>] ConditionObjs, id's or names

Categories

Simulation

Description

Report a specific simulation condition, or report all conditions in the current simulation. You must have an open simulation for this command to return anything.

Conditions can be defined prior to starting the simulation. When a condition is added, the simulator evaluates the condition expression anytime a signal change is detected. When a specified condition expression becomes TRUE, the condition commands are run.

This command returns the condition identifier, expression, commands, and names of conditions, or returns an error if the command fails.

Arguments

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

<ConditionObjs> - (Optional) Specifies one or more condition identifiers in the current simulation to report. The condition identifiers are returned by the add_condition command when the condition is defined. BY default the command reports all conditions.

Examples

The following example reports conditions in the current simulation. The condition identifier, expression, commands, and names are reported:

report_conditions  
#2: condition2  
     Expression: {/testbench/reset == 0 }  
     Command:    {  
puts "Condition Reset was encountered at [current_time]. \  
   Stopping simulation."  
stop }  
     Name:       resetLow  
#3: condition3  
     Expression: {/testbench/leds_n == X000 }  
     Command:    {  
puts "Condition LED Unknown was encountered at [current_time]. \  
   Stopping simulation."  
stop }  
     Name:       ledUnknown