Report properties on hardware objects
Syntax
report_hw_targets [‑quiet] [‑verbose]
Returns
hardware objects
Usage
Name | Description |
---|---|
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
Categories
Description
This command returns properties related to the configuration of all hw_targets on the current_hw_server object. The information reported by this command includes:
- Server Property Information: The properties of the current_hw_server, including HOST and PORT.
- Target Property Information: Reported for each target on the hw_server, including NAME, FREQUENCY, DEVICE_COUNT, and SVF.
- Device Property Information: Reported for each device on a specific hw_target, including PART, ID CODE, IR LENGTH, MASK, PROGRAMMING and PROBES FILE.
This command returns the requested information if successful, or returns an error if it fails.
Arguments
-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the
set_msg_config
command.Examples
The following example reports the property information for all targets on the connected hw_server:
report_hw_targets