Disconnect a net from the object.
Syntax
disconnect_bd_net [‑quiet] [‑verbose] <net> <objects>...Returns
TCL_OK, TCL_ERROR if failed.
Usage
| Name | Description |
|---|---|
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
<net>
|
The Net that the objects connect to |
<objects>
|
The objects to disconnect from the net |
Categories
Description
Disconnect a single net in the IP integrator subsystem design from the specified objects.
This command lets you disconnect the specified nets from pins or ports in the IP subsystem design, without deleting the whole net. To delete the whole net, you should use the delete_bd_objs command.
This command returns TCL_OK if it is successful, or TCL_ERROR if it fails.
Arguments
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
set_msg_config command.<net> - (Required) Specifies a single net in the IP subsystem design to disconnect from the specified objects. The net can be specified by name, or as a single object returned by the get_bd_nets command.
<objects> - (Required) The list of pin or port objects to disconnect the net from. The pins and ports must be specified as design objects returned by the get_bd_pins or get_bd_ports commands. They cannot simply be referenced by name.
Example
The following example disconnects the net, here specified by name, from the specified pin objects:
disconnect_bd_net /vidout1_locked [get_bd_pins {vidOut1/locked newMod1/t1}]