Remove an existing hardware SIO sweep.
Syntax
remove_hw_sio_sweep [‑quiet] [‑verbose] <hw_sio_sweeps>Usage
| Name | Description |
|---|---|
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
<hw_sio_sweeps>
|
hardware SIO sweeps |
Categories
Description
Remove the specified serial I/O analyzer sweep scan object.
This command returns nothing if successful, or returns an error if the command fails.
Arguments
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the
set_msg_config command.<hw_sio_sweeps> - (Required) Specify one or more hw_sio_sweep objects to remove. The hw_sio_sweep must be specified as an object as returned by the create_hw_sio_sweep or get_hw_sio_sweeps commands.
Example
The following example removes the specified sweep scan object:
remove_hw_sio_sweep [get_hw_sio_sweeps {SWEEP_3}]