Remove an existing hardware SIO link group.
Syntax
remove_hw_sio_linkgroup [‑quiet] [‑verbose] <hw_sio_linkgroups>
Usage
Name | Description |
---|---|
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
<hw_sio_linkgroups>
|
hardware SIO linkgroups |
Categories
Description
Removes the specified group that associates communication links between TX and RX objects on the GTs of the IBERT debug core defined on the current hardware device.
Vivado Serial I/O analyzer is a link-based analyzer. The links define the communication paths and protocols between transmitters and receivers of the GigaBit transceivers on the device. Link groups, or hw_sio_linkgroup objects, let you associate links into related groups, to collectively configure properties and run scans.
remove_hw_sio_linkgroup
command removes the specified association, but does not remove the underlying communication links. Us the remove_hw_sio_link
command to remove those objects.This command returns nothing if successful, or returns an error if it fails.
Arguments
-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
set_msg_config
command.<hw_sio_linkgroups> - (Required) Specify one or more hw_sio_linkgroup objects to remove. The hw_sio_linkgroup must be specified as an object as returned by the create_hw_sio_linkgroup
or get_hw_sio_linkgroups
commands.
Example
remove_hw_sio_linkgroup [get_hw_sio_linkgroups {LINKGROUP_0}]