Close a hardware target
Syntax
close_hw_target [‑quiet] [‑verbose] [<hw_target>]
Usage
Name | Description |
---|---|
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
[<hw_target>]
|
hardware target Default: current hardware target |
Categories
Description
Close the connection to the current or specified hardware target that was previously opened using the open_hw_target
command.
The hardware target is a system board containing a JTAG chain of one or more Xilinx devices that you can program with a bitstream file, or use to debug your design. Connections between hardware targets on the system board and the Vivado Design Suite are managed by the hw_server
application. Refer to Vivado Design Suite User Guide: Programming and Debugging (UG908) for a list of supported JTAG download cables and devices.
This command returns connection messages from the hardware server, or returns an error if it fails.
Arguments
-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
set_msg_config
command.<hw_target> - (Optional) Specify the hw_target object to close the connection to. The hw_target must be specified as an object as returned by the get_hw_targets
or current_hw_target
commands. If no target is specified, the open connection to the current_hw_target
will be closed.
Example
close_hw_target