The Vertical Flip register flips the image vertically when the S2MM is enabled.
|
Bits |
Field Name |
Default Value |
Access Type |
Description |
|---|---|---|---|---|
|
31-1 |
Reserved |
0h |
NA |
Writing to these bits has no effect, and they are always read as zeros. |
|
0(3) |
Enable Vertical Flip(1) |
1h |
R/W |
1 - Enable Vertical Flip(2) 0 - Disable Vertical Flip |
Notes:
1.The writes and reads to this register are allowed only when S2MM is enabled and Enable Vertical Flip is selected from the Advanced tab. See This Figure.
2.When Enable Vertical Flip is selected then by default the image is flipped and later the flip can be controlled using the Enable Vertical Flip register.
3.It is recommended to change this bit when the VDMA is in IDLE or stop condition.