refresh_design - 2024.1 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2024-05-30
Version
2024.1 English

Refresh the current design

Syntax

refresh_design [‑part <arg>] [‑quiet] [‑verbose]

Usage

Name Description
[-part] Target part
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution

Categories

Project

Description

Reloads the current design from the project data on the hard drive. This overwrites the in-memory view of the design to undo any recent design changes.

Arguments

-part <arg> - (Optional) The new target part for the design when it is reloaded. This overrides the constraint file part specified in the project data on the hard drive.

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

Examples

The following command reloads the current design from the project data on hard disk. This will overwrite the unsaved changes of the design which are in memory.

refresh_design
Note: You can use the command to undo a series of changes to the design and revert to the previously saved design.

The following example refreshes the current design using the specified V6 part as the target device. The second command is required to make the selected part the target device for the active implementation run.

refresh_design -part xc6vcx75tff784-1
set_property part xc6vcx75tff784-1 [get_runs impl_6]
Note: The second command is not required if the target part is not changed.

See Also