get_marked_objects - 2024.1 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2024-05-30
Version
2024.1 English

Get marked objects

Syntax

get_marked_objects [‑rgb <args>] [‑color <arg>] [‑quiet] [‑verbose]

Returns

List of marked objects.

Usage

Name Description
[-rgb] RGB color index list
[-color] Valid values are red green blue magenta yellow cyan and orange
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution

Categories

Object, GUIControl

Description

Get the marked objects in the current design open in the Vivado™ IDE. Objects can be marked with the mark_objects command.

You can get all marked objects in the design, or specify marked objects by color, or by RGB value.

Note: This Tcl command works only when Vivado is run in GUI mode.

Arguments

-rgb <args> - (Optional) The color to use in the form of an RGB code specified as {R G B}. For instance, {255 255 0} specifies the color yellow, while {0 255 0} specifies green.

-color <arg> - (Optional) The color used for marking the specified object or objects. Supported colors are: red, green, blue, magenta, yellow, cyan, and orange.

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

Examples

The following example gets all the marked objects in the current design:

get_marked_objects

The following example gets the object in the current design that are marked in the specified color:

get_marked_objects -color yellow