delete_power_results - 2024.1 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2024-05-30
Version
2024.1 English

Delete power results that were stored in memory under a given name.

Syntax

delete_power_results ‑name <arg> [‑quiet] [‑verbose]

Usage

Name Description
-name Name for the set of results to clear
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution

Categories

Power

Description

Deletes the power analysis results for the specified results set.

Note: This command operates silently and does not return direct feedback of its operation

Arguments

-name <arg> - (Required) The name of the results set to delete. This name was either explicitly defined, or was automatically defined when the report_power command was run.

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

Examples

The following example runs power analysis, and then clears the results:

report_power -name my_set
delete_power_results -name my_set