HBM Monitor Tcl Usage - 2024.2 English - 2024.1 English

Vivado Design Suite User Guide: Programming and Debugging (UG908)

Document ID
UG908
Release Date
2024-11-13
Version
2024.2 English

Use the following Tcl commands in the Vivado Tcl Console when connected to the hardware in the Vivado Hardware Manager to interact with the HBM Monitor.

  • get_hw_hbms - Displays a list of the HBM interfaces that exist in the design.
  • refresh_hw_hbm [lindex [get_hw_hbms] 0] - Refreshes the status of the specified hardware HBM(s), in this case the HBM denoted by index 0.
  • report_property [lindex [get_hw_hbms] 0] - Reports all the parameters available for the HBM interface specified, in this case for the HBM interface denoted by index 0.
  • run_hw_hbm_amon [lindex [get_hw_hbms] 0] - Enables the activity monitor runs for the specified hardware HBM(s).
  • stop_hw_hbm_amon [lindex [get_hw_hbms] 0] - Disables the Activity Monitor runs for the specified hardware HBM(s).

More specific details and examples can be found in Appendix D of AXI High Bandwidth Controller LogiCORE IP Product Guide (PG276).