Connect to the Hardware Target in Vivado - 2024.1 English

To connect to a hardware target in AMD Vivado™ , do the following:

1. To boot or configure the AMD device from flash, ensure the mode pins are selected for the target flash type. See the appropriate Technical Reference Manual (for AMD Versal™ devices Versal Adaptive SoC Technical Reference Manual (AM011)) or the Configuration User Guide for the device you are targeting.

   For more information, see the appropriate Configuration User Guide for the device you are targeting.

2. Follow the steps in Programming the Device to connect to the hardware target.
   Important: If the board is powered off or cable disconnected, Vivado IDE closes the hardware target. Any Vivado operation in the main Vivado thread is also canceled.