Clocking - 1.0 English

Versal ACAP Soft QDR-IV SRAM Memory Controller LogiCORE IP Product Guide (PG355)

Document ID
PG355
Release Date
2021-12-03
Version
1.0 English

The memory interface requires one XPLL per I/O bank used by the memory interface and BUFGs. These clocking components are used to create the proper clock frequencies and phase shifts necessary for the proper operation of the memory interface.

There are two XPLLs per bank. If a bank is shared by two memory interfaces, both XPLLs in that bank are used.

Note: QDR-IV SRAM generates the appropriate clocking structure and no modifications to the RTL are supported.

The QDR-IV SRAM IP generates the appropriate clocking structure for the desired interface. This structure must not be modified. The allowed clock configuration is as follows:

  • Differential reference clock source connected to GCIO
  • GCIO to XPLL (located in center bank of memory interface)
  • XPLL to BUFG (located at center bank of memory interface) driving the Xilinx® Versal® adaptive compute acceleration platform (ACAP) logic and all XPLLs
  • XPLL to BUFG (located at center bank of memory interface) divide by two mode driving 1/2 rate Versal ACAP logic