Transmitter

Versal Adaptive SoC GTM Transceivers Architecture Manual (AM017)

Document ID
AM017
Release Date
2024-09-05
Revision
1.1 English

This chapter shows how to configure and use each of the functional blocks inside the transmitter (TX). Each transceiver includes an independent transmitter, which consists of a PCS and a PMA. The following figure shows the functional blocks of the transmitter. Parallel data flows from the device logic into the TX interface, through the PCS and PMA, and then out the TX driver as high-speed serial data.

Figure 1. GTM Transmitter Block Diagram

The key elements within the transceiver TX are: