Step 5: Operating the Sample Design - 2024.2 English - 2024.1 English

Vivado Design Suite Tutorial: Dynamic Function eXchange (UG947)

Document ID
UG947
Release Date
2024-11-13
Version
2024.2 English

Position the board so that the text is readable. The LCD screen is on the side closest to you, with the power connection on the right and the JTAG connection on the left. The buttons of interest are the five user push buttons in the lower right corner, plus the PROG push button in the middle right. Their functions are as follows:

  • PROG (SW4) – program the device from the BPI flash
  • North (SW10) – load the Count Up partial bit file
  • South (SW8) – load the Count Down partial bit file
  • East (SW9) – load the Shift Right partial bit file
  • West (SW6) – load the Shift Left partial bit file
  • Center (SW7) – reset the design
Figure 1. Push Buttons, Switches, and Connections on the VCU108 Demonstration Board