Lab 7 Conclusion - 2024.1 English

Vivado Design Suite Tutorial: Dynamic Function eXchange (UG947)

Document ID
UG947
Release Date
2024-06-12
Version
2024.1 English

This concludes lab 7. In this lab, you:

  • Implemented an UltraScale+ version of a design with the Dynamic Function eXchange (DFX) Controller.
  • Compiled a MicroBlaze core with software that manages Dynamic Function eXchange events.
  • Programmed the QSPI on the VCU118 board.
  • Used a UART interface to manage Dynamic Function eXchange from QSPI or DDR4 memory.
  • Inserted bitstream delivery errors to see CRC checking capabilities.
Note: Although an SEM core exists within the design, it is not exercised during hardware testing in this lab. If the SEM core is running on hardware to detect upset events, it must be paused before performing Dynamic Function eXchange.