The following are the
commands followed by their options (if any) and the Python method for the option (if
any).
jtag claim
The following is the Python method.jt.claim()jtag device_properties
- <idcode>
-
jt.device_properties(0x6ba00477) - <key> <value> pairs
-
props = {'idcode': 0x6ba00477, 'irlen': 4}jt.device_properties(props=props) DONE
jtag disclaim
jt.disclaim()jtag frequency
jt.frequency()- -list
-
jt.frequency('-l')
- <frequency>
-
jt.frequency(freq)
jtag lock
jt.lock(100)jtag sequence
- state
-
s = self.session jt3 = s.jtag_targets(3) jseq = jt3.sequence() jseq.state("RESET") - irshift
-
jseq.irshift(register='bypass', state="IRUPDATE") - drshift
-
jseq.drshift(capture=True, state="IDLE", tdi=0, bit_len=2)
- delay
-
jseq.delay(100) - get_pin
-
jseq.get_pin('TDI') - set_pin
-
jseq.set_pin('TDI', 0)
- atomic
-
jseq.atomic()
- run
-
jseq.run() - clear
-
jseq.clear()
- delete
-
del jseq
jtag servers
jt.servers()- -list
-
jt.servers('-l')
- -format
-
jt.servers('-f')
- -open <server>
-
jt.servers(open='xilinx-xvc:localhost:10200')
- -close <server>
-
jt.servers(close='xilinx-xvc:localhost:10200')
jtag skew
jt.skew()- <clock-skew>
-
jt.skew()
jtag targets
self.session.jtag_targets()- [target-id]
-
self.session.jtag_targets(id=2)
- -set
-
self.session.jtag_targets('-s', filter="name == xcvc1902")
- -regexp
- -nocase
-
self.session.jtag_targets('-n', filter="name !~ XCVC*")
- -filter <filter-expression>
-
self.session.jtag_targets(filter="name == xcvc1902")
- -target-properties
-
self.session.jtag_targets('-t')
- -open
-
self.session.jtag_targets('-o')
- -close
-
self.session.jtag_targets('-c') - -timeout <sec>
- No method available
jtag unlock
jt.unlock()