Opmode - 2020.2 English

This block is listed in the following Xilinx® Blockset libraries: DSP and Index.

The Xilinx Opmode block generates a constant that is a DSP48E, DSP48E1, or DSP48E2 instruction. It is a 15-bit instruction for DSP48E, a 20-bit instruction for DSP48E1, and a 22-bit instruction for DSP48E2. The instruction consists of the opmode, carry-in, carry-in select, alumode, and (for DSP48E1 and DSP48E2) the inmode bits.

The Opmode block is useful for generating DSP48E, DSP48E1, or DSP48E2 control sequences. The figure below shows an example. The example implements a 35x35-bit multiplier using a sequence of four instructions in a DSP48E block. The Opmode blocks supply the desired instructions to a multiplexer that selects each instruction in the desired sequence.

Figure 1. DSP48E Block

Block Parameters

The block parameters dialog box can be invoked by double-clicking the icon in your Simulink® model.

Opmode tab

Parameters specific to the Opmode tab are as follows.

Instruction

Device: Specifies whether to generate an instruction for the DSP48E, DSP48E1, or DSP48E2 device.

DSP Instruction

Operation

Displays the instruction that is generated by the block. This instruction is also displayed on the block in the Simulink model.

Operation select

Selects the instruction.

Preadder output

Allows you to select the equation for the DSP48E1 Preadder.

DSP Primitive Configuration

Multiplier Output: Allows you to select the Multiplier Output of DSP58 to be normal or negated.
Preadder/Mult Function: Allows you to select the function performed by the DSP48E2 Preadder/Multiplier.
PREADDINSEL: Displays the setting of the PREADDINSEL static control bits that are part of the instruction generated by the Opmode block. In the DSP48E2 slice, the PREADDDINSEL setting (A or B) selects the input to be added with the D input in the pre-adder.
AMULTSEL: Displays the setting of the AMULTSEL static control bits that are part of the instruction generated by the Opmode block. In the DSP48E2 slice, the AMULTSEL setting (A or AD) selects the input to the 27-bit A input of the multiplier.
BMULTSEL: Displays the setting of the BMULTSEL static control bits that are part of the instruction generated by the Opmode block. In the DSP48E2 slice, the BMULTSEL setting (B or AD) selects the input to the 18-bit B input of the multiplier.

A register configuration

Allows you to select the A register configuration for the DSP48E2. Select either A1 or A2.

B register configuration

Allows you to select the B register configuration for the DSP48E1 or DSP48E2. Select either B1 or B2.

Custom Instruction

Note: The Custom Instruction field is activated when you select “Custom” in the Operation select field.

Instruction: Allows you to select the instruction for the DSP48E, DSP48E1, or DSP48E2.
Z mux: Specifies the 'Z' source to the add/sub/logic unit to be one of {'0', 'C', 'PCIN', 'P','C', 'PCIN>>17',' P>>17'}.
XY muxes: Specifies the 'XY' source to the DSP48's adder to be one of {'0','P', 'A:B', 'A*B', 'C', 'P+C', 'A:B+C' }. 'A:B' implies that A is concatenated with B to produce a value to be used as an input to the add/sub/logic unit.
W mux: Specifies the 'W' source to the DSP48E2’s adder to be one of {'0','P', 'RND', 'C' }.
Carry input: Specifies the 'carry' source to the DSP48's add/sub/logic unit to be one of {'0', '1', 'CIN', 'Round PCIN towards infinity', 'Round PCIN towards zero', 'Round P towards infinity', 'Round P towards zero', 'Larger add/sub/acc (parallel operation)', 'Larger add/sub/acc (sequential operation)', 'Round A*B'}.

For a description of any of the Custom Instruction options, see the following manuals:

DSP48E: Virtex-5 FPGA XtremeDSP Design Considerations (UG193)
DSP48E1: 7 Series DSP48E1 Slice User Guide (UG479)
DSP48E2: UltraScale Architecture DSP Slice User Guide (UG579)

Xilinx LogiCORE

The Opmode block does not use a Xilinx LogiCORE™.

DSP48E Control Instruction Format

DSP48E Instruction

Operation select	Notes
C + A*B
PCIN + A*B
P + A*B
A* B
C + A:B
C - A:B
C
Custom	Use equation described in the Custom Instruction Field.

DSP48E Custom Instruction

Instruction Field Name	Location	Mnemonic	Notes
XY muxes	op[3:0]	0	0
		P	DSP48 output register
		A:B	Concat inputs A and B (A is MSB)
		A*B	Multiplication of inputs A and B
		C	DSP48 input C
		P+C	DSP48 input C plus P
		A:B+C	Concat inputs A and B plus C register
Z mux	op[6:4	0	0
		PCIN	DSP48 cascaded input from PCOUT
		P	DSP48 output register
		C	DSP48 C input
		PCIN>>17	Cascaded input downshifted by 17
		P>>17	DSP48 output register downshifted by 17
Alumode	op[10:7]	X+Z	Add
Alumode	op[10:7]	Z-X	Subtract
Carry input	op[14:12]	0 or 1	Set carry in to 0 or 1
		CIN	Select cin as source. This adds a CIN port to the Opmode block whose value is inserted into the mnemonic at bit location 11.
		Round PCIN toward infinity
		Round PCIN toward zero
		Round P toward infinity
		Round P toward zero
		Larger add/sub/acc (parallel operation)
		Larger add/sub/acc (sequential operation)
		Round A*B

DSP48E1 Control Instruction Format

DSP48E1 Instruction

Operation select	Notes
C + A*B
PCIN + A*B
P + A*B
A* B
C + A:B
C - A:B
C
Custom	Use equation described in the Custom Instruction Field.

Preadder output	Notes
Zero
A2
A1
D + A2
D + A1
D
-A2
-A1
D - A2
D - A1

B register configuration	Notes
B1
B2

DSP48E1 Custom Instruction

Instruction Field Name	Location	Mnemonic	Notes
Instruction		X + Z
		X +NOT(Z)
		NOT(X+Z)
		Z - X
		X XOR Z
		X XNOR Z
		X AND Z
		X OR Z
		X AND NOT(Z)
		X OR NOT (Z)
		X NAND Z
Z mux	op[6:4]	0	0
		PCIN	DSP48 cascaded input from PCOUT
		P	DSP48 output register
		C	DSP48 C input
		PCIN>>17	Cascaded input downshifted by 17
		P>>17	DSP48 output register downshifted by 17
Operand: (Alumode)	op[10:7]	X+Z	Add
Operand: (Alumode)	op[10:7]	Z-X	Subtract
XY muxes	op[3:0]	0	0
		P	DSP48 output register
		A:B	Concat inputs A and B (A is MSB)
		A*B	Multiplication of inputs A and B
		C	DSP48 input C
		P+C	DSP48 input C plus P
		A:B+C	Concat inputs A and B plus C register
Carry input	op[14:12]	0 or 1	Set carry in to 0 or 1
		CIN	Select cin as source. This adds a CIN port to the Opmode block whose value is inserted into the mnemonic at bit location 11.
		Round PCIN toward infinity
		Round PCIN toward zero
		Round P toward infinity
		Round P toward zero
		Larger add/sub/acc (parallel operation)
		Larger add/sub/acc (sequential operation)
		Round A*B

DSP48E2 Control Instruction Format

DSP48E2 Instruction

Operation select	Notes
C + A*B
PCIN + A*B
P + A*B
A* B
C + A:B
C - A:B
C
Custom	Use equation described in the Custom Instruction Field.

Preadder/Mult Function	Notes
Zero
A*B
(D+A)*B
(D-A)*B
(D+A)**2
(D-A)**2
D**2
A**2
-(A**2)
(D+A)*A
(D-A)*A
(D+B)*A
(D-B)*A
D*A
B*A
-B*A
(D+B)**2
(D-B)**2
B**2
-(B**2)
(D+B)*B
(D-B)*B

A register configuration	Notes
A1
A2

B register configuration	Notes
B1
B2

DSP48E2 Custom Instruction

Instruction Field Name	Location	Mnemonic	Notes
XY muxes	op[3:0]	0	0
		P	DSP48 output register
		A:B	Concat inputs A and B (A is MSB)
		A*B	Multiplication of inputs A and B
		C	DSP48 input C
		P+C	DSP48 input C plus P
		A:B+C	Concat inputs A and B plus C register
Z mux	op[6:4]	0	0
		PCIN	DSP48 cascaded input from PCOUT
		P	DSP48 output register
		C	DSP48 C input
		PCIN>>17	Cascaded input downshifted by 17
		P>>17	DSP48 output register downshifted by 17
W mux	op[8:7]	0
		P	DSP48 output register
		RND	Rounding Constant into W mux
		C	DSP48 input C
ALU mode (Instruction)	op[12:9]	X + W + Z
		X +W + NOT(Z)
		NOT(X + W + Z)
		Z - (X+W)
		X XOR Z
		X XNOR Z
		X AND Z
		X OR Z
		X AND NOT(Z)
		X OR NOT (Z)
		X NAND Z
		X NOR Z
		NOT (X) OR Z
		NOT (X) AND Z
Carry input	op[16:13]	0 or 1	Set carry in to 0 or 1
		CIN	Select CIN as source. This adds a CIN port to the Opmode block whose value is inserted into the mnemonic at bit location 11.
		Round PCIN toward infinity
		Round PCIN toward zero
		Round P toward infinity
		Round P toward zero
		Larger add/sub/acc (parallel operation)
		Larger add/sub/acc (sequential operation)
		Round A*B
Pre-Adder/Mult Function	op[21:17]	Zero
		A * B
		(D + A) * B
		(D - A) * B
		(D + A)**2
		(D - A)**2
		D**2
		A**2
		-(A**2)
		(D + A) * A
		(D - A) * A
		(D + B) * A
		(D - B) * A
		D * A
		B * A
		-B * A
		(D + B)**2
		(D - B)**2
		B**2
		-(B**2)
		(D + B) * B
		(D - B) * B

DSPCPLX Control Instruction Format

The OpMode block, when configured with a DSPCPLX device, outputs 18-bit wide data to drive the consolidated control port of the DSPCPLX block. The DSPCPLX block internally feeds the same setting to respective individual Real and Imaginary control input ports.

Table 1. DSPCPLX Instruction
Operation Select	Notes
A*B
Custom	Use the equation described in the Custom Instruction Field.

Table 2. DSPCPLX Custom Instruction
Instruction Field Name	Location	Mnemonic	Notes
XY Muxes	op[3:0]	A*B	Multiplication of inputs A and B
Z mux	op[6:4]	0	0
		PCIN	DSPCPLX cascaded input from PCOUT
		P	DSPCPLX output register
		C	DSPCPLX C input
W mux	op[8:7]	0
		RND	Rounding constant into W mux
ALU mode (Instruction)	op[12:9]	X + W + Z
Carry input	op[16:13]	0 or 1	Set carry in to 0 or 1
Carry input	op[16:13]	CIN	Select CIN as source. This adds a CIN port to the Opmode block whose value is inserted into the mnemonic at bit location 11.
Conjugate A Input	op[17]	0 or 1	Select to complex conjugate the input A value
Conjugate B Input	op[18]	0 or 1	Select to complex conjugate the input B value

DSP58 Control Instruction Format

DSP58 Instruction

Operation select	Notes
C + A*B
PCIN + A*B
P + A*B
A* B
C + A:B
C - A:B
C
Custom	Use equation described in the Custom Instruction Field.

Preadder/Mult Function	Notes
Zero
±A*B
±(D±A)*B
±(D±A)**2
±(D)**2
±(A)**2
±(D±A)*A
±(D±B)*A
±D*A
±(D±B)**2
±(B)**2
±(D±B)*B

A register configuration	Notes
A1
A2

B register configuration	Notes
B1
B2

DSP58 Custom Instruction

Instruction Field Name	Location	Mnemonic	Notes
XY muxes	op[3:0]	0	0
		P	DSP58 output register
		A:B	Concat inputs A and B (A is MSB)
		A*B	Multiplication of inputs A and B
		C	DSP58 input C
		P+C	DSP58 input C plus P
		A:B+C	Concat inputs A and B plus C register
Z mux	op[6:4]	0	0
		PCIN	DSP58 cascaded input from PCOUT
		P	DSP58 output register
		C	DSP58 C input
		PCIN>>17	Cascaded input downshifted by 17
		P>>17	DSP58 output register downshifted by 17
W mux	op[8:7]	0
		P	DSP58 output register
		RND	Rounding Constant into W mux
		C	DSP58 input C
ALU mode (Instruction)	op[12:9]	X + W + Z
		X +W + NOT(Z)
		NOT(X + W + Z)
		Z - (X+W)
		X XOR Z
		X XNOR Z
		X AND Z
		X OR Z
		X AND NOT(Z)
		X OR NOT (Z)
		X NAND Z
		X NOR Z
		NOT (X) OR Z
		NOT (X) AND Z
Carry input	op[16:13]	0 or 1	Set carry in to 0 or 1
		CIN	Select CIN as source. This adds a CIN port to the Opmode block whose value is inserted into the mnemonic at bit location 11.
		Round PCIN toward infinity
		Round PCIN toward zero
		Round P toward infinity
		Round P toward zero
		Larger add/sub/acc (parallel operation)
		Larger add/sub/acc (sequential operation)
		Round A*B
Pre-Adder/Mult Function	op[21:17]	Zero
		±A*B
		±(D±A)*B
		±(D±A)**2
		±(D)**2
		±(A)**2
		±(D±A)*A
		±(D±B)*A
		±D*A
		±(D±B)**2
		±(B)**2
		±(D±B)*B
Negate	op[24:22]	0 or 1	Select Negate to negate the Multiplier output