Important: This option
cannot be used with embedded processor platforms.
The reset command resets the
programmable region on the card. All running CUs in the region are stopped and reset.
It has the following command line format:
xbutil reset [-d card]The following table lists the available option.
| Option | Description | Required |
|---|---|---|
-d <card>
|
Specifies the target card. <card> can be specified as
either the card_id or Bus:Device:Function (BDF). Defaults to card_id = 0 if not
specified. Note: Use the
xbutil scan command to
display both the card_id and BDF for installed cards. |
N |
The following example shows the output after running this command successfully:
All existing processes will be killed.
Are you sure you wish to proceed? [y/n]: y