The MIPI D-PHY IP core implements a D-PHY RX interface and provides PHY protocol layer support compatible with the CSI-2 RX interface. The MIPI D-PHY IP core also supports the deskew pattern detection for line rates greater than 1500 Mb/s. See the MIPI D-PHY LogiCORE IP Product Guide (PG202) [Ref 3] for details. MIPI D-PHY implementation differs for the UltraScale+ ™ devices and the 7 series devices with respect to I/O.
For UltraScale+ devices, the Vivado ® IDE provides a Pin Assignment Tab to select the required I/O. However, for the 7 series devices the clock capable I/O should be selected manually. In addition, the 7 series devices do not have a native MIPI IOB support. You will have to target either HR bank I/O or HP bank I/O for the MIPI IP implementation. For more information on MIPI IOB compliant solution and guidance, refer D-PHY Solutions (XAPP894) [Ref 15] .