The Board tab page provides board automation related parameters. The subsystem board configuration screen is shown in This Figure .
Board Interface: Select the board parameters.
• Custom: Allows user to configure custom values (no board automation support).
• fmc_hpc0_connector_EV_CSI2Rx_l2 : Applicable only for ZCU102 board with FMC_HPC0 connector selected as LI-IMX274MIPI-FMC V1.0 during board selection for 2-lane MIPI CSI-2 Rx Subsystem.
•
fmc_hpc0_connector_EV_CSI2Rx_l4
: Applicable only for ZCU102 board with FMC_HPC0 connector selected as LI-IMX274MIPI-FMC V1.0 during board selection for 4-lane MIPI CSI-2 Rx Subsystem.
This selection automatically configures the MIPI CSI-2 Rx Subsystem to support IMX274 camera sensor which can be connected to EV FMC card. For more information, see the
LI-IMX274MIPI-FMC
product page.