1. Open the Vivado Design Suite.
The Vivado IDE Getting Started page contains links to open or create projects and to view documentation.
2. In the Getting Started page, click Create Project to start the New Project wizard.
3. In the Project Name page, name the new project and enter the project location. Make sure to check the Create project subdirectory option and click Next .
4. In the Project Type page, specify the type of project to create as RTL Project, make sure to Uncheck the Do not specify sources at this time option, and click Next .
5. In the Add Sources page, click Next .
6. In the Add Existing IP (optional) dialog box, click Next .
7. In the Add Constraints (optional) dialog box, click Next .
8.
X-Ref Target - Figure 5-14 |
In the Default Part dialog box, click Boards to specify the board for the target device (ZCU102, SP701, and VCK190 boards are supported). Then click Next .
X-Ref Target - Figure 5-15 |
9. Review the New Project Summary page. Verify that the data appears as expected, per the steps above, and click Finish .
X-Ref Target - Figure 5-16 |
10. Click IP Catalog and select MIPI CSI-2 RX Subsystem under Video Connectivity, then double click on it.
X-Ref Target - Figure 5-17 |
° For the Application Example Design flow, IP configuration is based on options selected in the Application Example Design tab.
11. You can rename the IP component name.Configure the MIPI CSI-2 RX Subsystem Application Example Design tab to select the ZCU102, SP701, or VCK190 board-based design, then click OK .
X-Ref Target - Figure 5-18 |
The Generate Output Products dialog box appears.
12. Click Generate . You can optionally click Skip if you want to skip generating the output products.
X-Ref Target - Figure 5-19 |
13. Right click on the MIPI CSI-2 Rx Subsystem component under Design source, and click Open IP Example Design .
Note: Because this step involves the generation of the complete system including multiple subsystems, it will take some time to completely build the design.
X-Ref Target - Figure 5-20 |
14. Choose the target project location, then click OK .
15.
X-Ref Target - Figure 5-21 |
The overall system IP integrator block diagram of the ZCU102, SP701, or VCK190 board-based application example design is generated depending on the GUI option selected. You can choose to Run Synthesis, Implementation, or Generate Bitstream (Generate Device Image for the VCK190 board).
X-Ref Target - Figure 5-22 |
X-Ref Target - Figure 5-23 |
X-Ref Target - Figure 5-24 |
16. Select File > Export > Export hardware (.xsa)
X-Ref Target - Figure 5-25 |
17. Select Tools > Launch Vitis . Browse to your project location.
18. To create a new platform project using the generated .xsa file, click on the Create new platform tab in the Vitis window and follow the steps shown in This Figure to This Figure .
19. Select the mipi_example platform in the explorer window and click on the hammer to build it.
20. When the platform is created, open platform.spr > Board support package > mipicsiss .
X-Ref Target - Figure 5-29 |
21. Next, import the example and select the application corresponding to your hardware. Note the following:
° For the SP701 board based example design, select application xmipi_sp701_example
° For the ZCU102 board based example design, select application xmipi_example
° For the VCK190 board based example design, select application xmipi_vck190_example
X-Ref Target - Figure 5-30 |
22. Click on Project > Build to get the example design built and ready to use.
X-Ref Target - Figure 5-31 |