This section includes information about using Xilinx® tools to customize and generate the core in the Vivado Design Suite.
If you are customizing and generating the subsystem in the Vivado IP integrator, see the
Vivado Design Suite User Guide: Designing
IP Subsystems using IP Integrator (UG994) for detailed information. IP integrator might auto-compute certain
configuration values when validating or generating the design. To check whether the
values do change, see the description of the parameter in this chapter. To view the
parameter value, run the validate_bd_design
command in
the Tcl console.
You can customize the IP for use in your design by specifying values for the various parameters associated with the core using the following steps:
- Select the IP from the IP catalog.
- Double-click the selected IP or select the Customize IP command from the toolbar or right-click menu.
For details, see the Vivado Design Suite User Guide: Designing with IP (UG896) and Vivado Design Suite User Guide: Getting Started (UG910).