| Name | Size | I/O | Description |
|---|---|---|---|
| ctl_tx_send_rfi_* | 1 | I |
Transmit Remote Fault Indication (RFI) code word. If this input is sampled as a 1, the TX path only transmits Remote Fault code words. This input should be set to 1 until the RX path is fully aligned and is ready to accept data from the link partner. |
| ctl_tx_send_lfi_* | 1 | I |
Transmit Local Fault Indication (LFI) code word. Takes precedence over RFI. |
| ctl_tx_send_idle_* | 1 | I |
Transmit Idle code words. If this input is sampled as a 1, the TX path only transmits Idle code words. This input should be set to 1 when the partner device is sending Remote Fault Indication (RFI) code words. |
| stat_tx_local_fault_* | 1 | O | A value of 1 indicates the receive decoder state machine is in the TX_INIT state. This output is level sensitive. |
| stat_tx_total_bytes_* | 5 | O | Increment for the total number of bytes transmitted. |
| stat_tx_total_packets_* | 1 | O | Increment for the total number of packets transmitted. |
| stat_tx_total_good_bytes_* | 14 | O | Increment for the total number of good bytes transmitted. This value is only non-zero when a packet is transmitted completely and contains no errors. |
| stat_tx_total_good_packets_* | 1 | O | Increment for the total number of good packets transmitted. |
| stat_tx_bad_fcs_* | 1 | O | Increment for packets greater than 64 bytes that have FCS errors. |
| stat_tx_packet_64_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 64 bytes. |
| stat_tx_packet_65_127_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 65 to 127 bytes. |
| stat_tx_packet_128_255_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 128 to 255 bytes. |
| stat_tx_packet_256_511_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 256 to 511 bytes. |
| stat_tx_packet_512_1023_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 512 to 1,023 bytes. |
| stat_tx_packet_1024_1518_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 1,024 to 1,518 bytes. |
| stat_tx_packet_1519_1522_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 1,519 to 1,522 bytes. |
| stat_tx_packet_1523_1548_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 1,523 to 1,548 bytes. |
| stat_tx_packet_1549_2047_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 1,549 to 2,047 bytes. |
| stat_tx_packet_2048_4095_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 2,048 to 4,095 bytes. |
| stat_tx_packet_4096_8191_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 4,096 to 8,191 bytes. |
| stat_tx_packet_8192_9215_bytes_* | 1 | O | Increment for good and bad packets transmitted that contain 8,192 to 9,215 bytes. |
| stat_tx_packet_small_* | 1 | O | Increment for all packets that are less than 64 bytes long. Packets that are less than 64 bytes are not transmitted. |
| stat_tx_packet_large_* | 1 | O | Increment for all packets that are more than 9,215 bytes long. |
| stat_tx_frame_error_* | 1 | O | Increment for packets with tx_axis_tuser set to indicate an End of Packet (EOP) abort or frames aborted by de-asserting tvalid without tlast. |
| gig_ethernet_pcs_pma_status_vector_* | 16 | O | See the Status Vector Table in 1G/2.5G Ethernet PCS/PMA or SGMII LogiCORE IP Product Guide (PG047). |
| stat_core_speed_* | 2 | O | Indicates the operating core speed:
|
| gpcs_resetdone_* | 1 | O | Indicates the 1G core is out-of reset. |
| gt_switching_* | 1 | O | Indicates the GT DRP operation to switch the line rate is in progress. |