JTAG

ZCU111 Evaluation Board User Guide (UG1271)

Document ID
UG1271
Release Date
2023-04-28
Revision
1.4 English

Vivado™, AMD SDK, or third-party tools can establish a JTAG connection to the Zynq UltraScale+ RFSoC device through the FTDI FT4232 USB-to-JTAG/USB UART device (U34) connected to micro-USB connector (J83).

Note: The FTDI configuration image can be programmed with the Vivado tools. See the Programming FTDI Devices for Vivado Hardware Manager Support section in the Vivado Design Suite User Guide: Programming and Debugging (UG908) [Ref 15] . Alternatively, a JTAG-SMT2 or similar from Digilent is recommended.