The XCZU28DR RFSoC PL I/O bank voltages on the ZCU111 board are listed in Table: I/O Voltage Rails .
|
XCZU28DR |
Power Net Name |
Voltage |
Connected To |
|---|---|---|---|
|
PL bank 64 |
VCC1V8 |
1.8V |
GPIO |
|
PL bank 65 |
VADJ_FMC (1) |
1.8V |
FMCP_HSPC LA BUS [0:16] |
|
PL bank 66 |
VADJ_FMC (1) |
1.8V |
FMCP_HSPC LA BUS [17:32] |
|
PL bank 67 |
VCC1V2 |
1.2V |
PL_DDR4_DQ[32:63] |
|
PL bank 68 |
VCCIV2 |
1.2V |
PL_DDR4_DQ[0:31], SFPx_TX_DISABLE, SYSMON_SDA/SCL |
|
PL bank 69 |
VCC1V2 |
1.2V |
PL_DDR4 ADDR/CTRL, PMOD0&1[0:7],MSP430_GPIO[0:3] |
|
PL bank 84 |
VCC1V8 |
1.8V |
ADCIO[0:19], GPIO_SW[N,E,C,W] |
|
PL bank 87 |
VCC1V8 |
1.8V |
DACIO[0:19], GPIO_SW[S], SFP_SI5382_CLK_IN_SEL |
|
PS bank 500 |
VCC1V8 |
1.8V |
QSPI LWR/UPR, PS_GPIO2, I2Cx_SDA/SCL, UART0_RXD/TXD |
|
PS bank 501 |
VCC1V8 |
1.8V |
DP CTRL, PMU_GPO[0:5], SDIO I/F, PS_GPIO1 |
|
PS bank 502 |
VCC1V8 |
1.8V |
USB I/F, ENET I/F |
|
PS bank 503 |
VCC1V8 |
1.8V |
PS CONFIG I/F |
|
PS bank 504 |
VCC1V2 |
1.2V |
PS_DDR4 64-BIT SODIMM I/F |
|
Notes: 1. The ZCU111 board is shipped with VADJ_FMC set to 1.8V by the MSP430 system controller. |
|||