The ZCU111 evaluation board features are listed here. Detailed information for each feature is provided in Board Component Descriptions .
• XCZU28DR-2E, FFVG1517 package
• Form factor: rectangular 11.811 in. x 7.874 in. x 0.1 in.
• Configuration from:
° Dual Quad SPI
° Micro SD card
° USB-to-JTAG bridge
• Clocks
° GTR_REF_CLK_DP 27 MHz
° GTR_REF_CLK_USB3 26 MHz
° GTR_REF_CLK_SATA 125 MHz
° CLK_100 100 MHz
° CLK_125 125 MHz
° PS_REF_CLK 33.33 MHz
° USER_MGT_SI570 (default 156.25 MHz)
° USER_SI570 (default 300 MHz)
• PS DDR4 4 GB 64-bit SODIMM
• PL DDR4 4 GB 64-bit component (4x16-bit)
• PS GTR (bank 505) assignment
° DisplayPort 1.2 transmit only (two GTR)
° USB3 (one GTR)
° SATA with M2 connector (one GTR)
• PL GTY assignment (16 total)
° SFP28 (four, bank GTY128)
° FMCP HSCP DP (four, bank GTY129)
° FMCP HSCP DP (four, bank GTY130)
° FMCP HSCP DP (four, bank GTY131)
• PL FMCP HSCP (FMC+) connectivity - full LA[00:33] bus
• PS MIO connectivity
° PS MIO[0:5, 7:12]: dual Quad SPI flash memory
° PS MIO[13]: PS_GPIO2
° PS MIO[14:17]: two channels of I2C
° PS MIO[18:19]: UART (one of three FT4232 UART channels)
° PS MIO[22:23]: PS_PB, PS_LED I/F
° PS MIO[26]: platform management unit (PMU)
° PS MIO[27:30]: DisplayPort control
° PS MIO[32:37]: PMU_GPIO[0:5]
° PS MIO[38]: PS_GPIO1
° PS MIO[44:51]: SD I/F
° PS MIO[52:63]: USB3.0
° PS MIO[64:77]: GEM3 Ethernet
• PL I/O connections:
° PL-side user DIP switch (8-position)
° PL-side CPU reset pushbutton
° PL-side user LEDs (eight)
° PL-side user pushbuttons (five, geographic N, S, E, W, C)
° PL-side PMOD0/1 (two R.A. 2x6 receptacles)
• Security - PSBATT button battery backup
• SYSMON header
• Operational switches (power on/off, PROG_B, boot mode DIP switch)
• Operational status LEDs (INIT, DONE, PS STATUS, PGOOD)
• Power management
• System controller (MSP430)
The ZCU111 provides a rapid prototyping platform using the XCZU28DR-2EFFVG1517 device. See the Zynq UltraScale+ RFSoC Data Sheet: Overview (DS889) [Ref 1] for a feature set overview, description, and ordering information.