Two Samtec LPAF (8x40) connectors provide access to the ADC/DAC clocking and data path signals. The Samtec part number is LPAF-40-03.0-S-08-2-K-TR. See
Table: RF RFMC Plug-in Card Interface
and
This Figure
.
Table 3-20:
RF RFMC Plug-in Card Interface
|
Technical Details
|
|
Part number
|
LPAF-40-03.0-S-08-2-K-TR
|
|
Series
|
LPAF
|
|
Number of positions
|
–40
|
|
Lead style
|
–03.0 = 3.0 mm
|
|
Plating option
|
Non-standard option
Contact SAMTEC: –S = 30µ
Selective gold in contact area, matte tin on tail
|
|
Row option
|
–08 = eight row
|
|
Solder type
|
–2 = 95.5% tin/3.8% silver/.7% copper crimp tail
|
|
Pick and place pad
|
–K - polyamide file pad
|
|
Tape and reel packaging
|
–TR = tape and reel packaging
|
Figure 3-20:
SAMTEC Connector
|
X-Ref Target - Figure 3-20
|
The RFMC LPAF connector pin definitions are shown in
This Figure
(RF-ADC J47) and
This Figure
(RF-DAC J94). RF-ADC banks 224-227 and RF-DAC banks 228-229 are fully pinned out to J47 and J94, respectively.
Figure 3-21:
RFMC RF-ADC LPAF Connector, Vertical Orientation (A1 in Upper Right Corner)
|
X-Ref Target - Figure 3-21
|
Figure 3-22:
RFMC DAC LPAF Connector, Vertical Orientation (A1 Upper Right Corner)
|
X-Ref Target - Figure 3-22
|
See
HW-FMC-XM500
for information about the AMD HW-FMC-XM500 RFMC plug-in card.