Adding and Removing Interface Parameters - 2023.2 English

The Parameters tab, shown in the following figure, displays the parameters defined for the interface. Some bus interfaces require associated parameters. The Vivado IDE identifies some parameters automatically, and recommends those parameters for the interface.

To add interface parameters:

1. Click the Add button .

   A dialog box to specify the parameter name opens.

   
   
   
2. Enter a parameter name and click OK.
3. Specify the following for each parameter as you add them:

   Description

   The parameter description.

   Value

   The parameter value.

   By default, these are the fields that are available to enter information.

   Tip: Right-click the Header row for a list of parameter properties to add.
4. Click OK.