The Board tab page provides board automation related parameters. The subsystem board configuration screen is shown in previous figure.
- Board Interface
- Select the board parameters.
- Custom
- Allows user to configure custom values (no board automation support).
- fmc_hpc0_connector_EV_CSI2Rx_l2
- Applicable only for ZCU102 board with FMC_HPC0 connector selected as LI-IMX274MIPI-FMC V1.0 during board selection for 2-lane MIPI CSI-2 RX Subsystem.
- fmc_hpc0_connector_EV_CSI2Rx_l4
- Applicable only for ZCU102 board with FMC_HPC0 connector selected as
LI-IMX274MIPI-FMC V1.0 during board selection for 4-lane MIPI CSI-2 RX Subsystem.
This selection automatically configures the MIPI CSI-2 RX Subsystem to support IMX274 camera sensor which can be connected to EV FMC card. For more information, see the LI-IMX274MIPI-FMC product page.