The following figure shows the relationship between the fields in the Vivado IDE and the User Parameters (which can be viewed in the Tcl Console).
| Vivado IDE Parameter | User Parameter | Default Value |
|---|---|---|
| Pixel Format | CMN_PXL_FORMAT | RAW8 |
| YUV420 word count | YUV420_BUF_DPTH | 128 |
| Serial Data Lanes | CMN_NUM_LANES | 1 |
| Allowed VC | CMN_VC | All |
| Pixels Per Clock | CMN_NUM_PIXELS | 1 |
| Include video Format Bridge (VFB) | CMN_INC_VFB | True |
| Support CSI Spec V2_0 | C_EN_CSI_V2_0 | False |
| Support VCX Feature | C_EN_VCX | False |
| Line Rate (Mb/s) | DPY_LINE_RATE | 1000 |
| D-PHY Register Interface | DPY_EN_REG_IF | False |
| Calibration Mode | C_CAL_MODE | None |
| IDELAY Tap Value | C_IDLY_TAP | 1 |
| External IDELAY tap loading | C_EN_EXT_TAP | False |
| Include IDELAYCTRL in Core | C_SHARE_IDLYCTRL | False |
| Enable 300 MHZ Clock for IDELAYCTRL | C_EN_CLK300M | False |
| Embedded non-image Interface | CSI_EMB_NON_IMG | False |
| Line Buffer Depth | CSI_BUF_DEPTH | 2048 |
| Enable CRC | C_CSI_EN_CRC | True |
| Enable Active Lanes | C_CSI_EN_ACTIVELANES | False |
| Shared Logic | Support Level | 0 |
| HP IO Bank Selection | HP_IO_BANK_SELECTION | Value based on part selected. |
| Clock Lane | CLK_LANE_IO_LOC | Value based on part selected |
| Data Lane0 | DATA_LANE0_IO_LOC | Value based on part selected |
| Data Lane1 | DATA_LANE1_IO_LOC | Value based on part selected |
| Data Lane2 | DATA_LANE2_IO_LOC | Value based on part selected |
| Data Lane3 | DATA_LANE3_IO_LOC | Value based on part selected |
| HS_SETTLE Parameter (ns) | C_HS_SETTLE_NS |
135ns + 10UI Hidden parameter, which can be used to set HS_SETTLE value. Can be set through Tcl flow. |
| Filter User Defined data types | C_CSI_FILTER_USERDATATYPE | False |
| Target Board | C_EXDES_BOARD | ZCU102 |
| FMC Model | C_EXDES_FMC | LI-IMX274MIPI-FMC V1.0 Single Sensor |
| Design Topology | C_EXDES_CONFIG | MIPI_Video_Pipe_Camera_to_Display |
| TDATA Width | AXIS_TDATA_WIDTH | 32 |
| TDEST Width | AXIS_TDEST_WIDTH | 4 |
| TUSER Width (CSI-2 options) | AXIS_TUSER_WIDTH | 96 |
| TUSER Width (VFB options) | VFB_TU_WIDTH | 1 |
| C_EXT_MMCM | Internal MMCM | 0 |