The Pin Assignment tab page allows to select pins. The subsystem pin assignment configuration screen is shown in the following figure.
Note: This tab is not available for 7 series device configurations.
Figure 1. Subsystem Customization Screen - Pin Assignment
- HP IO Bank Selection
- Select the HP I/O bank for clock lane and data lane implementation.
- Clock Lane
- Select the LOC for clock lane. This selection determines the I/O byte group within the selected HP I/O bank.
- Data Lane 0/1/2/3
- Displays the Data lanes 0, 1, 2, and 3 LOC based on the clock lane selection.