Vivado IP Catalog Options - 4.1 English

AXI Central Direct Memory Access LogiCORE IP Product Guide (PG034)

Document ID
Release Date
4.1 English

The AXI CDMA can be found in \AXI_Infrastructure and also in Embedded_Processing\AXI_Infrastructure\DMA in the IP catalog.

To access the AXI CDMA, perform the following:

1.Open a project by selecting File then Open Project or create a new project by selecting File then New Project in the Vivado Integrated Design Environment (IDE).

2.Open the IP catalog and navigate to any of the taxonomies.

3.Double-click AXI Central Direct Memory Access to bring up the AXI CDMA Vivado IDE.

For details, see the Vivado Design Suite User Guide: Designing with IP (UG896) [Ref 1] and the Vivado Design Suite User Guide: Getting Started (UG910) [Ref 4].

Note:   Figures in this chapter are illustrations of the Vivado IDE. This layout might vary from the current version.

If you are customizing and generating the core in the Vivado IP integrator, see the Vivado Design Suite User Guide, Designing IP Subsystems Using IP Integrator (UG994) [Ref 3] for detailed information. Vivado IDE might auto-compute certain configuration values when validating or generating the design, as noted in this section. You can view the parameter value after successful completion of the validate_bd_design command.

Figure 4-1:      AXI CDMA Vivado IDE

X-Ref Target - Figure 4-1



Figure 4-2:      IP Integrator

X-Ref Target - Figure 4-2