- For ZynqMP
// without FPD off / Select GEM as wake device $ echo enabled > /sys/devices/platform/axi/ff0e0000.ethernet/net/eth0/power/wakeup # Note: For version before 2022.1: # $ echo enabled > /sys/devices/platform/amba/ff0e0000.ethernet/net/eth0/power/wakeup / Suspend $ echo mem > /sys/power/state //for FPD off $ echo pm_request_wakeup 8 1 0 1 > /sys/kernel/debug/zynqmp-firmware/pm $ echo pm_force_powerdown 6 > /sys/kernel/debug/zynqmp-firmware/pm / Select GEM as wake device $ echo enabled > /sys/devices/platform/axi/ff0e0000.ethernet/net/eth0/power/wakeup # Note: For version before 2022.1: # $ echo enabled > /sys/devices/platform/amba/ff0e0000.ethernet/net/eth0/power/wakeup // Suspend $ echo mem > /sys/power/state
- For Versal
/ Select GEM as wake device $ echo enabled > /sys/devices/platform/axi/ff0c0000.ethernet/net/eth0/power/wakeup # Note: For version before 2022.1: # $ echo enabled > /sys/devices/platform/amba/ff0c0000.ethernet/net/eth0/power/wakeup $ echo mem > /sys/power/state
Note: To Wake up using Ethernet, Please ping the specific interface's IP address.