Known 2017.1 Issues:
(1) The FPD Off Suspend to RAM feature is not yet released. This is an early version available for demo purposes, and will be updated when the release version is available. The FPD Off Suspend to RAM feature is currently available on a limited basis. Please see your Field Application Engineering representative for more information on this feature.
(2) The MSP430 source builds the compatible MSP430 version, but may not support all debug features.
(3) For this release, SD cards must not be class (10) for reliable boot (e.g. class (4) is fine).
Note: This version of Power Advantage Tool Control Console no longer needs to be launched after Linux boot. It no longer uses the Power Sensor calibrations, so Linux can freely overwrite the Power Sensor calibrations. There is a small improvement to the measurement accuracy as well.
Note: The Power Advantage Tool now takes control of the APU serial port if available. To give user control of the APU terminal, close the Power Advantage Tool, then launch the following script to open terminals, then open the Power Advantage Tool again. The Power Advantage Tool will complain that "No APU UART available", but just close that message.