- Ribbon Cable to female pin sockets: Strip three conductors to 6” length, solder darkest wire to Ultra96 I2C Test Point GND, brightest wire to SCL (CLK), and mid wire to SDA (MOSI)
- Bus Pirate (Seeed Studio) v3.6: Attach female ribbon cable pin sockets to Bus Pirate connector GND pin 10, CLK (SCL) pin 4, and MOSI (SDA) pin 3
- Velcro dots: Mount Bus Pirate to back side of Ultra96
- Mini USB: Attach to Bus Pirate to PC. This also powers the Bus Pirate via USB power.
Power Advantage Tool