Clocking - 5.4 English

MIPI CSI-2 Receiver Subsystem LogiCORE IP Product Guide (PG232)

Document ID: PG232
Release Date: 2023-11-06
Version: 5.4 English

The subsystem clocks are described in the following table. Clock frequencies should be selected to match the throughput requirement of the downstream video pipe IP cores.

Table 1. Subsystem Clocks
Clock Name	Description
lite_aclk	AXI4-Lite clock used by the register interface of all IP cores in the subsystem.
video_aclk	Clock used as core clock for all IP cores in the subsystem.
dphy_clk_200M	See the MIPI D-PHY LogiCORE IP Product Guide (PG202) for information on this clock.
clkoutphy_out	The clkoutphy_out signal is generated within the PLL with 2500 Mbps line rate when the Include Shared logic in core option is selected. When Deskew detection is enabled, the clockoutphy_out signal is generated with the same line rate same as the subsystem line rate.
clkoutphy_in	The clkoutphy_in signal should be connected to the clkoutphy_out signal generated when the Include Shared logic in core option is selected.
rxbyteclkhs_cnts_out	The rxbyteclkhs_cnts_out is the continuous clock signal generated within the PLL with the same frequency as rxbyteclkhs when the Include Shared logic in core option is selected and line rates are greater than 1500 Mbps.
rxbyteclkhs_cnts_in	The rxbyteclkhs_cnts_in signal should be connected to the rxbyteclkhs_cnts_out signal generated when the Include Shared logic in example design option is selected and line rates are greater than 1500 Mbps.
The `lite_aclk` clock should be less than or equal to `video_aclk`.