set_directive_bind_storage - 2022.2 English

Description

The set_directive_bind_storage command assigns a variable (array, or function argument) in the code to a specific memory type (type) in the RTL. If the command is not specified, the Vitis HLS tool determines the memory type to assign. The HLS tool implements the memory using specified implementations (impl) in the hardware. For example, you can use the set_directive_bind_storage command to specify which type of memory, and which implementation to use for an array variable. Also, this allows you to control whether the array is implemented as a single or a dual-port RAM.

You can use the -latency option to specify the latency of the implementation. For block RAMs on the interface, the -latency option allows you to model off-chip, non-standard SRAMs at the interface, for example supporting an SRAM with a latency of 2 or 3. For internal operations, the -latency option allows the operation to be implemented using more pipelined stages. These additional pipeline stages can help resolve timing issues during RTL synthesis.

For best results, Xilinx recommends that you use -std=c99 for C and -fno-builtin for C and C++. To specify the C compile options, such as -std=c99, use the Tcl command add_files with the -cflags option. Alternatively, select the Edit CFLAGs button in the Project Settings dialog box as described in Creating a New Vitis HLS Project.

Syntax

set_directive_bind_storage [OPTIONS] <location> <variable>

• <location> is the location (in the format function[/label]) which contains the variable.
• <variable> is the variable to be assigned.
  Tip: If the variable is an argument of a top-level function, then use the -storage_type and -storage_impl options of the INTERFACE pragma or directive.

Options

-type

Defines the type of memory to bind to the specified variable.

Supported types include: fifo, ram_1p, ram_1wnr, ram_2p, ram_s2p, ram_t2p, rom_1p, rom_2p, and rom_np.

Table 1. Storage Types

Type	Description
FIFO	A FIFO. Vitis HLS determines how to implement this in the RTL, unless the -impl option is specified.
RAM_1P	A single-port RAM. Vitis HLS determines how to implement this in the RTL, unless the -impl option is specified.
RAM_1WNR	A RAM with 1 write port and N read ports, using N banks internally.
RAM_2P	A dual-port RAM that allows read operations on one port and both read and write operations on the other port.
RAM_S2P	A dual-port RAM that allows read operations on one port and write operations on the other port.
RAM_T2P	A true dual-port RAM with support for both read and write on both ports.
ROM_1P	A single-port ROM. Vitis HLS determines how to implement this in the RTL, unless the -impl option is specified.
ROM_2P	A dual-port ROM.
ROM_NP	A multi-port ROM.

-impl <value>

Defines the implementation for the specified memory type. Supported implementations include: bram, bram_ecc, lutram, uram, uram_ecc, srl, memory, and auto as described below.

Table 2. Supported Implementation

Name	Description
MEMORY	Generic memory for FIFO, lets the Vivado tool choose the implementation.
URAM	UltraRAM resource
URAM_ECC	UltraRAM with ECC
SRL	Shift Register Logic resource
LUTRAM	Distributed RAM resource
BRAM	Block RAM resource
BRAM_ECC	Block RAM with ECC
AUTO	Vitis HLS automatically determine the implementation of the variable.

Table 3. Supported Implementations by FIFO/RAM/ROM

Type	Command/Pragma	Scope	Supported Implementations
FIFO	bind_storage 1	local	AUTO, BRAM, LUTRAM, URAM, MEMORY, SRL
FIFO	config_storage	global	AUTO, BRAM, LUTRAM, URAM, MEMORY, SRL
RAM* | ROM*	bind_storage	local	AUTO BRAM, BRAM_ECC, LUTRAM, URAM, URAM_ECC
RAM* | ROM*	config_storage 2	global	N/A
RAM_1P	set_directive_interface s_axilite -storage_impl	local	AUTO, BRAM, URAM
	config_interface -m_axi_buffer_impl	global	AUTO, BRAM, LUTRAM, URAM
When no implementation is specified the directive uses AUTOSRL behavior as a default. However, this value cannot be specified. config_storage only supports FIFO types.

-latency <int>

Defines the default latency for the binding of the storage type to the implementation. The valid latency varies according to the specified type and impl. The default is -1, which lets Vitis HLS choose the latency.

Examples

In the following example, the coeffs[128] variable is an argument to the function func1. The directive specifies that coeffs uses a single port RAM implemented on a BRAM core from the library.

set_directive_bind_storage -impl bram "func1" coeffs RAM_1P

See Also

• pragma HLS bind_storage