Using the Tcl Command - 2024.1 English

Vivado Design Suite Tutorial: Logic Simulation (UG937)

Document ID
UG937
Release Date
2024-06-12
Version
2024.1 English

Enable logging of the waveform for the specified HDL objects by entering the following command in the Tcl console:

log_wave [get_objects /testbench/dut/*] [get_objects /testbench/dut/U_SINEGEN/*]
Note: See the Vivado Design Suite Tcl Command Reference Guide (UG835) for more information on the log_wave command.

This command enables signal dumping for the specified HDL objects, /testbench/dut/* and /testbench/dut/U_SINEGEN/*.

Note: * symbol specifies all the HDL objects in a scope.
The log_wave command writes the specified signals to a waveform database, which is written to the simulation folder of the current project:
<project_name>/<project_name>.sim/sim_1/behav/xsim