Syntax
- For Zynq devices and Zynq UltraScale+ MPSoC:
[boot_device] <options> - For AMD Versal™
adaptive
SoC:
boot_device { <options>, address=<address> }
Description
Note: This attribute needs to be added in BIF targeted for
primary boot Image (PDI in case of Versal)
Specifies the secondary boot device. Indicates the secondary boot device on which the partition is present.
Arguments
Options for Zynq devices and Zynq UltraScale+ MPSoC:
- qspi32
- qspi24
- nand
- sd0
- sd1
- sd-ls
- mmc
- usb
- ethernet
- pcie
- sata
The address field specifies the offset of the image in the given flash device. Options for Versal adaptive SoC:
- qspi32
- qspi24
- nand
- sd0
- sd1
- sd-ls (SD0 (3.0) or SD1 (3.0))
- mmc
- usb
- ethernet
- pcie
- sata
- ospi
- smap
- sbi
- sd0-raw
- sd1-raw
- sd-ls-raw
- mmc1-raw
- mmc0
- mmc0-raw
- imagestore
Example
Note: The following examples are for BIF for primary boot
image.
- For example Zynq devices and Zynq UltraScale+ MPSoC:
all: { [boot_device]sd0 [bootloader,destination_cpu=a53-0]fsbl.elf } - For example AMD Versal™
adaptive
SoC:
new_bif: { id_code = 0x04ca8093 extended_id_code = 0x01 id = 0x2 boot_device { mmc, address=0x10000 } image { name = pmc_subsys, id = 0x1c000001 { id = 0x01, type = bootloader, file = plm.elf } { id = 0x09, type = pmcdata, load = 0xf2000000, file = pmc_data.cdo } } image { name = lpd, id = 0x4210002 { id = 0x0C, type = cdo, file = lpd_data.cdo } { id = 0x0B, core = psm, file = psm_fw.elf } } image { name = pl_cfi, id = 0x18700000 { id = 0x03, type = cdo, file = system.rcdo } { id = 0x05, type = cdo, file = system.rnpi } } image { name = fpd, id = 0x420c003 { id = 0x08, type = cdo, file = fpd_data.cdo } } }