Main Page - 2024.2 English

The main view has the following options:

Launch Config Name

You can specify the configuration name

Target Connection

In the connection field, you can select a target or create a target connection by clicking New in the connection field.

Target Setup Mode

You can select a standalone debug or attach a running target.

Bitstream File

You can specify the bit file by browsing to corresponding directory

Board Initialization

You can use the FSBL to initialize the board or use Tcl to initialize the board.

FSBL file

Specify the FSBL file to do initialization

FSBL Exit Function

Specify the FSBL exit function

Init With FSBL

Use FSBL to initialize the PS.

Reset Entire System

Perform a system reset if there is only one processor in the system

Reset APU

Reset all the APU cores

Reset RPU

Reset all the RPU cores

Enable RPU Split Mode

Put RPU cores in split mode so that they can be used independent of each other

Program Device

Allow tool to program the bit file to the device

Enable Cross Triggering

Enable the cross trigger function

Figure 1. Launch Configuration Window