When migrating from version 2016.3 or earlier, note the following:
- Hot Plug Detect Active has been added to HDMI 1.4/2.0 Transmitter Subsystem
GUI.
Choose High in the Example Design (according to board design).
- Hot Plug Detect Active has been added to HDMI 1.4/2.0 Receiver Subsystem
GUI.
Choose Low in Example Design (according to board design).
- Cable Detect Active has been added to HDMI 1.4/2.0 Receiver Subsystem
GUI.
Choose Low in Example Design (according to board design).
- HDCP 1.4/2.3 is enabled by default in Example Design application software.
Removed UART option to Enable HDCP 1.4 or HDCP 2.3.
- Auto switching has been added to the Example Design Application software.
You do not need to choose HDCP 1.4 or HDCP 2.3 from UART. A corresponding HDCP is selected according to the capability of connected source/sink. If the device support both HDCP 1.4 and HDCP 2.3, the priority is given to HDCP 2.3.
- HDCP repeater feature has been added.
You can enabled/disable it by selecting h from the UART menu.
- System log is moved from direct UART printout to event log.
You can display the event log by selecting z from the UART menu.